Facebook Linkedin

The Recharger® 902HD is a 48" (1219 mm) tall, ultra-high capacity chamber which has been designed and tested in accordance with ASTM F2787 "Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers".

The Recharger 902HD provides resistance to the loads and load factors as defined in AASHTO LRFD Bridge Design Specifications Section 12.12.

Typically when using this model, fewer chambers are required resulting in less labor and a smaller installation area. The Recharger® 902HD has the side portal internal manifold feature. HVLV® FC-48 Feed Connectors are inserted into the side portals to create the internal manifold.


The Recharger 902HD is available in only one model type and is open on both ends.
A separate end cap is required with this unit (sold separately) to cap the ends of rows.

Unit of Measure

Length

N/A 4.1 ft1.25 m

Width

N/A 78 in1981 mm

Height

N/A 48 in1219 mm

Installed Length

N/A 3.67 ft1.12 m

Length Adjustment per Run

N/A 1.03 ft0.31 m

Chamber Storage

N/A 17.66 ft³/ft64.75 ft³/unit1.64 m³/m1.84 m³/unit

Min. Installed Storage

N/A 27.27 ft³/ft100 ft³/unit2.53 m³/m2.83 m³/unit

Min. Area Required per Unit

N/A 26.58 ft²2.47 m²

Min. Center-to-Center Spacing (Design Unit Width)

N/A 7.25 ft2.21 m

Max. Allowable Cover

N/A 2.53 m8.3 ft

Max. Inlet Opening in End Wall

N/A 24 in600 mm

Max. Allowable O.D. in Side Portal

N/A 11.5 in292 mm

Compatible Feed Connector

N/A HVLV FC-48 Feed Connector

Compatible End Cap

N/A Recharger 902HD End Cap